Top 10 Must Have Side by Side Accessories – Part 2

Here’s Whomoto’s Part 2 of the top 10 must have accessories for your UTV. Check out Part 1 here!

  1. Winch and Winch Mount
  2. Racks/Storage Systems
  3. Full Skid Plate
  4. Doors
  5. Heater

Number 6: Winch and Winch Mount

Whether you need to pull your self out of a muddy situation, help out a friend, or move a heavy load, a winch can be a life saver.  They range usually from about a 3000 lb to 5000 lb rating. We recommend using at least a 4000 lb winch, if you own a relatively heavy UTV or side by side, you may want to go even higher. Another option on many winches is the type of cable: steel or synthetic. Each has its own advantages and disadvantages. Wire is more resistant to abrasion and can handle heat better. Synthetic rope of the same diameter is stronger and more lightweight.

Number 7: Racks/Storage System

If you carry a lot of gear for work or when out hunting, you may find that there simply is enough space to put everything! yamaha-viking-front-rackAdding a front rack or roof rack can easily double the amount of storage you have on your side by side. If you need quick access to items, we recommend getting a front rack. If, like many of our customers, you use your UTV to refill deer feeders a lot, than a roof rack would be a better choice. You can both store and load the deer feed conveniently form your side by side’s top. Shown on the right is the front rack we make for the Yamaha Viking and Viking VI. Head on over to whomoto.com and see what rack and storage options we have for your UTV!

Number 8: Full Skid Plate

polaris-ranger-900-uhmw-skid-plateDriving through rough terrain can easily damage the underside of your side by side. Adding a metal or UHMW skid plate adds loads of protection and can save you from heavy maintenance costs later on. If you only need protection from from large sticks/debris and occasionally a large rock, a cheaper metal skid plate will work just fine. If you do a lot of rock crawling then UHMW is a must. It is a slick, durable plastic, similar to cutting boards in your kitchen. If you have a metal skid plate and are rock crawling, the aluminum or steel will easily get caught on the boulders. With a UHMW skid, you will slide over more easily. WhoMoto offers aluminum, UHMW, and hybrid options, each custom designed just for your vehicle.

Number 9: Doors

Doors can add a sense of security, look great, and most importantly, more room for stickers! In case of a rollover, these can be a real life saver. Doors can either be half or full. Half doors can be great more affordable option to add some protection. If you live a very cold area or want to completely seal your self off from the elements, we recommend full doors. Construction range any where from metal, to canvas, to gel coat (similar to fiber glass). Add a heater with a full set of doors and you are sure to stay warm and cozy even during the harshest weather. Speaking of which, that leads us right into our last must have accessory!

Number 10: Heater

Combined with a full cab system (front and rear window, top, and doors), you wont even know you’re in a side by side. A properly designed heater provides a clean OEM look and relatively simple installation. Many heaters also have a defrost feature. Helping to remove the ice off of your window. Head on over to our shop and pick the specific heater for your vehicle to make winter more bearable.


Check out Part 1 in case you missed it!

Advertisements

A-Arm Guards – Cheaper Than a CV Axle

What are A Arm Guards and why do you need them?

Obviously, this article is about CV boot guards. They also go by the names a-arm guards, brush beaters, stick stoppers etc. All the same thing, just different names. Whatever you wish to call them, they can save you a ton of headaches.
The rubber boot at the wheel end of your axle is the CV boot. A stick, heavy brush or some properly thrown stones via the tires will tear one with ease. Inside the boot/s (each driven wheel has one) are some ball bearings in their carriers which are encased in some of the nastiest grease known to all mankind. One little tear in the CV boot and the ball bearings days are numbered. A trip through the woods or across the creek with a torn or ripped boot and you can just about guarantee they’re toast. One grain of sand will completely ruin your day in the wilderness. If you get a cyclic ticking noise when you’re moving or turning, well then they’re already gone.

ricochet-a-arm-guard-for-polaris-rangerCV boot / A-Arm guards mount to your lower a-arms and for the most part installation is a cinch. 3 or 4 P clamps on each one is the general mounting style. A good pair of boot guards will also have some drain holes cut in them for easy cleaning as you don’t want a bunch of mud etc. building up around the boots. Generally speaking a set of 4 will set you back just shy of the $200.00 figure. About the price of just one axle minus the labor to swap one out if you aren’t your own mechanic. For the price of one axle, you can protect all 4 on your vehicle!

Aftermarket boot guards are generally made of steel or aluminum. The boot guards that may be on your stock machine aren’t really worth much if they are the plastic type. Their coverage is minimal and their strength is pretty poor as well. Personally we prefer aluminum as these guys live in a pretty tough environment and steel will just wind up rusting no matter how well the paint or powdercoating was applied.

So if you and your UTV are blazing new trails or if you live where the mesquite grows you may want to invest in a set of these. They really are cheap insurance. Here at WhoMoto we carry several different brands such as EMP but highly recommend the A Arm guards made by Ricochet Offroad. To find the specific set for your vehicle, simply head over to WhoMoto.com, navigate to your specific vehicle, then click on the body protection sub category. We offer CV boot guards your Polaris Ranger, Yamaha Viking, Honda Pioneer, and more!